If you’re searching for a professional waste management business to provide a service for skip hire in Kent, get in touch with the friendly and dedicated team at RTS Waste Management.
The RTS team can provide both domestic and commercial skip hire, so if you are interested and you would like to arrange a delivery, an exchange, or a collection, you can get in touch with the RTS Waste Management team by giving us a call on 020 7232 1711.
What Sizes Are Available?
If you are interested in hiring a skip from the RTS Waste team, you could choose from the following sizes.
6 Yard Skip
Our 6 yard skips have a capacity (m3) of 5m3, and a capacity (yd3) of 6yd3.
The 6 yard skips have a height of 1250mm, a length of 3400mm and a width of 1780mm.
8 Yard Skip
Our 8 yard skips have a capacity (m3) of 6.7m3, and a capacity (yd3) of 8yd3.
The 8 yard skips have a height of 1250mm, a length of 3750mm, and a width of 1780mm.
12 Yard Skip
Our 12 yard skips have a capacity (m3) of 10m3, and a capacity (yd3) of 12yd3.
The 12 yard skips have a height of 1680mm, a length of 3960mm, and a width of 1780mm.
Professional Skip Hire Services In Kent For Both Commercial And Domestic Clients
The talented RTS Waste team have a long history of working with high profile clients from a variety of different business sectors such as, schools, hospitals, builders, demolition, shops, factories and more. However, we also provide professional waste disposal services to general households and local residents.
Our Transfer Station is located in Swanscombe, Dartford, Kent. This means that we can provide cheap and efficient skip hire covering many Kent locations such as:
Dartford, Maidstone, Gravesham, Hawley, Higham, Northfleet Green, Southfleet, Temple Hill, Wilmington, and more!
The postcodes in both blue and yellow areas are covered from our waste transfer station in Kent. So if you would like a quote, please contact our team using the red Contact Us at the top of the page!
The Location Of The Skip
When disposing of waste using a skip hire service, it is very important that you think about where the skip will be located.
Firstly, it is very important to remember that you cannot locate a skip directly below trees. The typical access required for a skip to be delivered and collected needs to be at least 10ft wide, 32ft long, and has a gross weight of around 18 tonnes with a full skip.
If the location that you were considering placing the skip is unsuitable, you may have to place the skip in a different location. Additionally, please remember to get all the necessary permissions regarding skip hire.
If you would like to place a skip on a public highway, a permit is required. However, if you need a skip permit, please speak to the RTS Waste Management team. We can arrange a permit when you place your order. The typical time for permits to become available is 7 working days, however in some cases they can be available sooner. (Fees vary depending on the area and placement)
Who Is Responsible For Waste Disposed Of Through A Skip Hire Waste Disposal Service?
Please remember that you are legally responsible for the contents of the skip you hire. This means that you need to ensure that the waste disposed in the skip meets our Terms and Conditions.
It is also very important that you do not dispose of waste irresponsibly. This includes overloading the skip. An overloaded skip is a hazard; the lorry may struggle to lift the skip and the overfilled waste could be a danger to other people as the skip is being lifted or transported. As such, make sure that the contents of a skip never exceed the height of the skip’s sides.
Additionally, if a skip is overloaded, the lorry driver reserves the right to either remove excess waste from the skip, or refuse to remove the skip altogether. In the event that the driver refuses to remove a skip, a wasted journey charge may incur.
Also, please remember that you must never set fire to the waste in your skip.
Additional Waste Services From RTS Waste Management
There are numerous different waste services available from the RTS waste team. For example, one of our other methods for disposing of waste is the Jumbo Bag. This is a disposal container which is 1 cubic meter in size and can hold up to 200kg!
The Jumbo Bag is a fantastic disposal method, and is recommended for items of waste which are required to be collected separately for environmental legislation purposes, such as plasterboard (Gypsum based construction waste EWC 17 08 02).
Other disposal methods from the RTS team include waste solutions such as a commercial man and van service, RORO container services, and recycling services.
Would You Like To Make An Enquiry? Contact The RTS Waste Management Team Today!
If you are interested in a skip hire waste disposal service in the Kent area, please do not hesitate to get in touch with our friendly team. We understand that some people may find waste disposal confusing and difficult to understand. However, if you choose a skip hire service from the RTS Waste Management team, you can relax and enjoy peace of mind in the knowledge that your waste is being disposed of in a responsible manner.
If you would like to request an instant quote, you can do so by clicking the red “Contact Us” button at the top of this page.